FLUXX® made by SABEU
Booth number: A1E08-01
fluxx-sabeu.com
About us
FLUXX Packaging made by SABEU
– Venting, Dosing, Closing with the X-tra
Since 1958 we have offered expertise in the manufacturing of Injection Molded Components and Filter Membranes.
Our long-standing experiences in the divisions of: Packaging, Healthcare, Life Sciences, and Industrial makes us an ideal partner. We collaborate with our customers to resolve current challenges and offer high-quality solutions. Additionally, we provide customer benefit by providing membranes as well as plastic components from one single source – including our tool shop, R&D and assembling services.
In the Packaging division we develop products based on customer specifications (OEM) and set our own standards with the product line FLUXX® — all Made in Germany with the highest of quality and craftmanship.
Our FLUXX® products are unique Dosing systems (Dispensing Taps), innovative Venting components (Degassing Inserts and Vented Caps) as well as standardized Closing solutions (Screw Caps) for several containers in various applications.
Our extensive knowledge extends into customized product design and development as well as excellent quality standards (DIN EN ISO 9001, DIN EN ISO 13485), food compliance and meets industrial regulations and standards. Our broad portfolio and commitment to quality and safety brings to you the right partner at the right time.
We look forward to exchanging ideas with you!
Address
Detlev-Karsten-Rohwedder-Str. 10
37154 Northeim
Germany
E-mail: sales@sabeu.com
Phone: +49 5551 9101241
Internet: fluxx-sabeu.com
Contact person:
Products & Services
Venting, Dosing & Closing – With the FLUXX® brand, SABEU is offering high-quality Dispensing Taps, Degassing Inserts, Vented Caps, Screw Caps and other plastic & membrane product solutions for various containers in different applications.
Injection molding and filtration are our passion. In these areas we set own standards with our FLUXX® Packaging product line, but also develop individual products based on customer specifications as OEM partner – all Made in Germany.
We are cooperating with our customers to resolve current challenges and offer best solutions. Thanks to this cooperative approach and the steadily growing know-how, we have been successful on the market for decades and are optimally prepared for the future.
FLUXX® Dispensing Taps
Scope of application
The innovative FLUXX® Dispensing Taps perfectly facilitate the easy, fast and clean decanting of liquids without gurgling. Series AH 13 supports the accurate and clean dosing – especially in bottles with small threaded necks. Series AH 23 is designed to support the dosing of large amounts of liquids within a short period of time.
Broad product portfolio
Our FLUXX® Dispensing Taps are suitable for all containers – bottles, canisters, drums and IBC’s – with an external thread ranging from DIN 38 to DIN 71 as well as plastic and steel drums with an ¾" and 2" internal thread.
Benefits
Easy, fast and clean dispensing without gurgling
Available for all common thread sizes
Drip-off edge for convenient and clean dosing – even in narrow bottle necks
Smooth moving lever for easy operability
High flow rates
Resistance to a multitude of chemicals
Declaration of food conformity
FLUXX® Degassing Inserts
Scope of application
The high-quality FLUXX® Degassing Inserts make it possible for gaseous substances to diffuse, thereby preventing pressure from building up and decreasing in the containers – including bottles, canisters, drums and IBCs. The membranes are hydrophobic as well as oleophobic, and as a result, they are not moistened even by liquids with a low surface tension.
Broad product portfolio
For a continuous pressure compensation of containers, our FLUXX® Degassing Inserts F15, F17 & F38 – without and with catch (LOCK) – can be pressed in customized closures or other applications. The Degassing Inserts contain various high-performance membranes which were validated for specific product solutions.
Benefits (X-tra)
Continuous pressure compensation
Prevent containers from swelling and collapsing
Reliable protection against leaks
Drip-off edge for a rapid re-ventilation after contact with liquids
Easy to install
Declaration of food conformity
FLUXX® Vented Caps
Scope of application
Our unique FLUXX® Vented Caps are equipped with the SAVE System and are available for common thread sizes with DIN 45, 51 and 61. For the venting system we are using high-quality membranes, which enable a continuous pressure compensation with gaseous liquids, to prevent containers from swelling and collapsing. The membranes are hydrophobic as well as oleophobic, and as a result, they are not moistened even by liquids with a low surface tension.
SAVE Venting System
The SAVE (SAfety VEnt) has a wedge-like design and the membrane is welded on at a 60° angle. This enables the liquids to drain off immediately, leaving the membrane unobstructed and air permeable. In addition, no splash protection is needed as the liquid flows past the beveled membrane, should a canister fall over, rather than hitting it head-on.
Benefits
Continuous pressure compensation
Prevent containers from swelling and collapsing
Reliable protection against leaks
Drip-off edge for a rapid re-ventilation after contact with liquids
Ready to use – venting component combined with the cap
Declaration of food conformity
FLUXX® Screw Caps
Scope of application
The versatile FLUXX® Screw Caps are made of impact-resistant polyethylene (PE) and are available for common thread sizes with DIN 45, 51 and 61. Our Caps are especially suitable for hazardous goods because of high chemical resistance against aggressive liquids.
Suitability for hazardous goods
Because of the construction, our FLUXX® Screw Caps can meet all requirements for authorization with various containers – especially in accordance with the test specifications set forth in the ADR regulations. As a standard feature, the Caps are equipped with a molded on tamper-vidence ring as well as an EPE sealing ring.
Benefits
Secure closing
Reliable protection against leaks
Suitability for hazardous goods packaging
High chemical resistance
Molded on tamper-evidence ring
Declaration of food conformity
Membrane manufacturing
Membrane technology by SABEU
As a specialist in the development of custom-manufactured membranes (PFOA-free), we are one of the world‘s very few in the industry with such know-how. We are offering microporous PTFE as well as ion-track membranes under the brand TRAKETCH® – on rolls, as sheets or discs and combined with plastic components. The membranes can also be further refined by special processes to create hydrophobic and oleophobic surfaces.
Versatile applications
Our high-performance membranes are generally characterized by an excellent chemical resistance and thus suitable for several applications. Typical applications are pressure compensation elements for packaging – including liquid foods, hygiene and care products, cleaners, agrochemicals as well as other hazardous materials.
