Coperion K-Tron Deutschland GmbH

Booth number Hall 5B114

www.coperion.com

About us

Coperion K-Tron is a global leader in providing process automation,
equipment, systems and solutions for bulk material handling. Coperion
K-Tron makes the feeders and pneumatic conveying components,
supervisory controls and digital scales that go into its material handling
systems. Coperion K-Tron holds more than 100 patents for feeding,
weighing, mechanical components and control technologies and their
application to bulk solids handling in the Plastics, Chemical, Food,
Pharmaceutical, Detergent and Nonwoven industries.

All scales, mechanical systems and controls are designed specifically for the unique demands of the process industries. Coperion K-Tron pneumatic
conveying systems are able to move high volumes of bulk material from rail
car to storage, to process. And Coperion K-Tron vacuum conveying systems
are fully integrated for refill of Coperion K-Tron feeders.

Products and services

  • Process Automation Equipment
  • Systems and Solutions for Bulk Materials Handling
  • Feeders and Pneumatic Conveying Components
  • Supervisory
  • Controls and Digital Scales for Material Handling Systems
  • Feeding, Weighing
  • Mechanical Components
  • Control Technologies
  • Worldwide Service
Coperion K-Tron Twin Screw Feeders - Reliable feeding of most bulk materials

Twin screw feeders can be used for free flowing powders and fine granulates but they are ideal for feeding difficult materials such as pigments, sticky, bridging or flooding powders, fiber and fiberglass. The twin screw feeders of Coperion K-Tron are available in a wide range of sizes to meet your feed rate requirements and solve your material handling problems, like
quick material changes. They can even be configured for differing material properties.

Further reading

Coperion K-Tron Single Screw Feeders - Reliable feeding of free flowing bulk materials

Single screw feeders are ideal for feeding free flowing bulk materials such as pellets and powders. Coperion K-Tron makes both single screw and twin screw volumetric (most common and economial) and gravimetric feeders in a wide range of sizes to meet your feed rate requirements and solve your material handling problems. Some are optimized for quick material changes and can even be configured for differing material properties.

Further reading

Coperion K-Tron Vacuum Sequencing Receivers

Finding the right solution for your application is easy with our broad range of receivers.
Coperion K-Tron vacuum sequencing receivers are designed to high quality standards for pneumatically conveying powders, pellets and granular materials for the bulk material handling industries.
The Series 2400 receivers are designed for a wide range of pneumatic conveying needs. The line offers vacuum receivers for conveying materials in the plastics, chemical, mineral and food industries.

Further reading

Address
Coperion K-Tron Deutschland GmbH
Heinrich-Krumm-Str. 6
63073 Offenbach
Germany

Phone: +49 6051 962644
Fax: +49 6051 962644
Internet: www.coperion.com
E-mail: Send message

Contact person

Kathy Taylor
Marketing Manager
Phone: +1 856 2563065
E-mail: Send message

News & Innovations

Coperion K-Tron present Unique Electronic Pressure Compensation for Its High-Accuracy Loss-in-Weight Feeders

Coperion K-Tron present a unique Electronic Pressure Compensation (EPC) system for their high-accuracy loss-in-weight feeders.
The main advantages of this system include improved accuracy and reliability as well as lower initial cost and easier installation compared to traditional mechanical pressure compensation systems.
Retrofitting options for existing feeders are available.
EPC can be installed on a majority of Coperion K-Tron gravimetric feeders in almost any application and all industries.


Further reading
K-Vision controller now supports two independent lines of feeders
The K-Vision controller is a graphical operator interface for controlling multiple devices such as feeders or feeder refill (vacuum receivers) in a process. With the release of K-Vision Software version 2.0, the K-Vision is now able to handle a total of 24 devices (e.g. KCM feeder controls or MPC refill controls) in one or two lines. This is a major upgrade over the previous version which managed a maximum of 16 feeder controllers in a single line. K-Vision uses a 12.1-inch color LCD display together with a touchscreen as the primary operator input mechanism. It offers a quad screen display mode for viewing multiple pages on one feeder or a single page on multiple feeders. Support for over a dozen languages – including Chinese and Japanese – is included, and additional languages can be added on request.
Further reading
Controlled vibrations for optimal product flow - The ActiFlow™ Bulk Solid Activator optimizes bulk material feeding.
Many bulk materials, especially fine powders, are cohesive and do not flow consistently out of the supply hopper during feeding. Such poor flow properties can lead to the formation of rat holes or even material bridges, making it difficult to accurately deliver these materials to the process. The Coperion K-Tron ActiFlow™ Bulk Solid Activator is the perfect solution to avoid this problem. This technology ensures maximum possible optimization of material flow, is easy to clean and has no effect to the material properties.
Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact